The Stereo high resolution Peak Meter .
The S3-TK-PS is a stereo high resolution Peak Meter that can be used for stereo group modules, master modules and input channels in the meterbridge of the SRC51 Surround Console and the ToolCon Live Console. The meter has 40 LED's and a range from + 15 dB to - 40 dB.

Stereo LED Peakmeter TK-PS

The Stereo Peakmeter completes the range of Surround Console modules. These modules have 40 light-emitting diodes, electronically balanced inputs and can process signal levels as high as +30 dBu in the frequency band without reaction on the connected source. The Led peakmeter display ranges from -40 to +15dB and the 0 dB levels can be adjusted over a wide area.

The resolution of the Led peakmeter is 1dB in the +15dB to -20 dB level range, below -20 dB the resolution is dB.

The Led peakmeter complies with the DIN 45405 and has an accuracy of < ±0.25dB for all levels above - 30 dB. The response time is 10ms from -1dB with a 10 oscillation burst of a 1kHz frequency @ 0dB level and can be changed to 1ms with an internal jumper. The release time is 1.5 s for 20 dB and is linear in the lower area of the display.

Three of these meters can be used in the SRC51 Surround Console for the 5.1 master section for the 6 output channels. A total of 4 meters fit into the master section. The additional meter no. 4 can be used to dispaly the PFL level.

If the TK-PS Peakmeter is used with the input module IM5, the left channel displays the calibrated or uncalibrated input and the right channel displays the group output signal.

Stereo LED Peakmeter TK-PS Top Plate